Prakai Nadee - New pages [en]

SP Monitor Pocket 32

2019-11-08T08:00:56Z

Prakai:

{{DISPLAYTITLE:Prakai's Wiki, eduroam-TH SP Monitoring}}
{{#seo:
|keywords=Prakai Nadee, Wiki, Personal Wiki, eduroam, eduroam-TH, SP Monitoring, IoT, WEMOS WiFi & Bluetooth Battery ESP32
|description=Prakai Nadee's Wiki, eduroam-TH SP Monitoring
}}__NOTOC__

== eduroam-TH SP Monitoring firmware installation for WEMOS WiFi & Bluetooth Battery ESP32 ==
=== WEMOS WiFi & Bluetooth Battery ESP32 ===

[https://eduroam-mon.uni.net.th/doc/images/6/60/Pocket_32-300px.png https://eduroam-mon.uni.net.th/doc/images/6/60/Pocket_32-300px.png]

* ESP32-based (ESP-WROOM-32 240MHz)
* USB Micro, CP2102 USB to UART bridge
* 4MB SPI flash memory + 520K RAM
* 1 Button, 1 Reset
* 2.4G Antenna
* 5V DC power supply
* 18650 charging system integrated
* Development platform: MicroPython, Arduino

=== Where to buy ===
* [https://www.mosfex.com/product/66/%E0%B8%9A%E0%B8%AD%E0%B8%A3%E0%B9%8C%E0%B8%94%E0%B8%9E%E0%B8%B1%E0%B8%92%E0%B8%99%E0%B8%B2-iot-%E0%B8%9E%E0%B8%A3%E0%B9%89%E0%B8%AD%E0%B8%A1%E0%B8%A5%E0%B8%B1%E0%B8%87%E0%B8%96%E0%B9%88%E0%B8%B2%E0%B8%99%E0%B9%83%E0%B8%AA%E0%B9%88%E0%B9%81%E0%B8%9A%E0%B8%95-li-ion-18650-wemos-esp32-wifibluetooth ฿530, บอร์ดพัฒนา IoT พร้อมลังถ่านใส่แบต Li-ion 18650 WeMos ESP32 WiFi+Bluetooth]
* [https://www.arduinoall.com/product/1779/wemos-esp32-esp-wroom-32-18650-battery-socket-%E0%B8%9A%E0%B8%AD%E0%B8%A3%E0%B9%8C%E0%B8%94-esp32-%E0%B8%A3%E0%B8%B8%E0%B9%88%E0%B8%99-esp-wroom-32-%E0%B8%9E%E0%B8%A3%E0%B9%89%E0%B8%AD%E0%B8%A1%E0%B8%97%E0%B8%B5%E0%B9%88%E0%B9%83%E0%B8%AA%E0%B9%88%E0%B9%81%E0%B8%9A%E0%B8%95%E0%B9%80%E0%B8%95%E0%B8%AD%E0%B8%A3%E0%B9%8C%E0%B8%A3%E0%B8%B5%E0%B9%88-1 ฿540, WeMos ESP32 ESP-WROOM-32 + 18650 Battery Socket บอร์ด ESP32 รุ่น ESP-WROOM-32 พร้อมที่ใส่แบตเตอร์รี่ 18650 และวงจรชาร์จในตัว]

=== How to flash eduroam-TH SP monitor firmware for WEMOS WiFi & Bluetooth Battery ESP32 ===
==== System requirement ====
* Desktop/Labtop computer
* Microsoft Windows 8, 10
* Windows PowerShell
* USB port

==== Instruction ====
* Download [https://www.rmuti.ac.th/user/prakai/p/eduroam-TH-firmware.zip eduroam-TH firmware and flashing tool]
* Extract the downloaded file to a local disk (ex: D:\):

* List of files:
D:\eduroam-TH-firmware\
- esptool.exe
- WemosBattery.ps1
- ESP32-eduroam-mon.ino.pocket_32.bin
- ESP32-eduroam-mon.ino.partitions.bin
- boot_app0.bin
- bootloader_dio_80m.bin

* Run Windows PowerShell: '''Win+r >> PowerShell.exe'''
Windows PowerShell
Copyright (C) Microsoft Corporation. All rights reserved. 
PS C:\Users\Hello World> _

* Change location to D:\duroam-TH-firmware
PS C:\Users\Hello World> '''D:'''
PS D:\> '''cd eduroam-TH-firmware'''
PS D:\eduroam-TH-firmware> _

* Enable execution of PowerShell scripts
PS D:\eduroam-TH-firmware> '''Set-ExecutionPolicy -Scope CurrentUser -ExecutionPolicy Unrestricted -Force'''

* Run the flashing script: '''WemosBattery.ps1''' and follow the instruction
PS D:\eduroam-TH-firmware> '''.\WemosBattery.ps1'''
=====================================================================
=============== eduroam-TH monitoring device flash tool ===============
======================================================================= 
1) Connect Wemos WiFi with Battery to computer 
Press Enter to continue...:

* Connect WEMOS WiFi & Bluetooth Battery ESP32 to USB of computer
=======================================================================
=============== eduroam-TH monitoring device flash tool ===============
======================================================================= 
2) Select a COM port 
'''1: Silicon Labs CP210x USB to UART Bridge (COM111)'''
2: Standard Serial over Bluetooth link (COM5)
3: Standard Serial over Bluetooth link (COM6)
4: Standard Serial over Bluetooth link (COM3)
5: Standard Serial over Bluetooth link (COM4)
Q: Press 'Q' to quit. 
Please select COM port: '''1'''

* Firmware flashing starts, '''Long press BOOT button if flashing does not start in 5 seconds'''
=======================================================================
=============== eduroam-TH monitoring device flash tool ===============
======================================================================= 
3) Long press BOOT button if flashing does not start in 5 seconds 
Flashing: Silicon Labs CP210x USB to UART Bridge (COM111)
=======================================================================
esptool.py v2.6
Serial port COM111
Connecting....
Chip is ESP32D0WDQ6 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
MAC: cc:50:e3:99:1b:48
Uploading stub...
Running stub...
...
Leaving...
Hard resetting via RTS pin...

* Device reboot and running
=======================================================================
4) Disconnect Wemos WiFi with Battery from computer to stop serial monitor
======================================================================= 
eduroam-TH SP monitoring device version 0.30-2019103100
ESP32 Development Board: Pocket_32
...
Connecting WiFi to: eduroam
Security Type: WPA2 Enterprise
.............................
WiFi connection successfully
...
Wifi will disconnect and reconnect again in 30 minutes
Going into DeepSleep mode and will wake up in 30 minutes

* Disconnect WEMOS WiFi & Bluetooth Battery ESP32 from computer

=== How to use ===
--- Please wait ---

SP Monitor doitESP32devkitV1

2019-11-08T07:57:52Z

Prakai:

{{DISPLAYTITLE:Prakai's Wiki, eduroam-TH SP Monitoring}}
{{#seo:
|keywords=Prakai Nadee, Wiki, Personal Wiki, eduroam, eduroam-TH, SP Monitoring, IoT, DOIT ESP32 DEVKIT V1
|description=Prakai Nadee's Wiki, eduroam-TH SP Monitoring
}}__NOTOC__

== eduroam-TH SP Monitoring firmware installation for DOIT ESP32 DEVKIT V1 ==
=== DOIT ESP32 DEVKIT V1 ===

[https://eduroam-mon.uni.net.th/doc/images/b/b4/DoitESP32devkitV1-300px.png https://eduroam-mon.uni.net.th/doc/images/b/b4/DoitESP32devkitV1-300px.png]

* ESP32-based (ESP-WROOM-32 240MHz)
* USB Micro, CP2102 USB to UART bridge
* 4MB SPI flash memory + 520K RAM
* 1 Button, 1 Reset
* 2.4G Antenna
* 5V DC power supply
* Development platform: MicroPython, Arduino

=== Where to buy ===
'''Where to buy'''
* [http://www.robotsiam.com/product/119/doit-esp32-devkit-v1-development-board-wifi-bluetooth ฿240, DOIT ESP32 DevKit V1 Development Board WiFi + Bluetooth]
* [https://www.arduinoall.com/product/1465/esp32-doit-esp32-devkit-v1-esp-32s-nodemcu-esp-wroom-32-wi-fi-and-bluetooth-dual-core-esp-32-esp-32s ฿300, ESP32 DOIT ESP32 DEVKIT V1 ESP-32S NodeMCU ESP-WROOM-32 Wi-Fi and Bluetooth Dual Core ESP-32 ESP-32S ESP 32]

=== How to flash eduroam-TH SP monitor firmware for DOIT ESP32 DEVKIT V1 ===
==== System requirement ====
* Desktop/Labtop computer
* Microsoft Windows 8, 10
* Windows PowerShell
* USB port

==== Instruction ====
* Download [https://www.rmuti.ac.th/user/prakai/p/eduroam-TH-firmware.zip eduroam-TH firmware and flashing tool]
* Extract the downloaded file to a local disk (ex: D:\):

* List of files:
D:\eduroam-TH-firmware\
- esptool.exe
- DoITDevKitV1.ps1
- ESP32-eduroam-mon.ino.doitESP32devkitV1.bin
- ESP32-eduroam-mon.ino.partitions.bin
- boot_app0.bin
- bootloader_dio_80m.bin

* Run Windows PowerShell: '''Win+r >> PowerShell.exe'''
Windows PowerShell
Copyright (C) Microsoft Corporation. All rights reserved. 
PS C:\Users\Hello World> _

* Change location to D:\duroam-TH-firmware
PS C:\Users\Hello World> '''D:'''
PS D:\> '''cd eduroam-TH-firmware'''
PS D:\eduroam-TH-firmware> _

* Enable execution of PowerShell scripts
PS D:\eduroam-TH-firmware> '''Set-ExecutionPolicy -Scope CurrentUser -ExecutionPolicy Unrestricted -Force'''

* Run the flashing script: '''DoITDevKitV1.ps1''' and follow the instruction
PS D:\eduroam-TH-firmware> '''.\DoITDevKitV1.ps1'''
=====================================================================
=============== eduroam-TH monitoring device flash tool ===============
======================================================================= 
1) Connect DoIT ESP32 DevKitV1 to computer 
Press Enter to continue...:

* Connect DOIT ESP32 DEVKIT V1 to USB of computer
=======================================================================
=============== eduroam-TH monitoring device flash tool ===============
======================================================================= 
2) Select a COM port 
'''1: Silicon Labs CP210x USB to UART Bridge (COM111)'''
2: Standard Serial over Bluetooth link (COM5)
3: Standard Serial over Bluetooth link (COM6)
4: Standard Serial over Bluetooth link (COM3)
5: Standard Serial over Bluetooth link (COM4)
Q: Press 'Q' to quit. 
Please select COM port: '''1'''

* Firmware flashing starts, '''Long press BOOT button if flashing does not start in 5 seconds'''
=======================================================================
=============== eduroam-TH monitoring device flash tool ===============
======================================================================= 
3) Long press BOOT button if flashing does not start in 5 seconds 
Flashing: Silicon Labs CP210x USB to UART Bridge (COM111)
=======================================================================
esptool.py v2.6
Serial port COM111
Connecting....
Chip is ESP32D0WDQ6 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
MAC: 3c:71:bf:ab:0c:b8
Uploading stub...
Running stub...
...
Leaving...
Hard resetting via RTS pin...

* Device reboot and running
=======================================================================
4) Disconnect DoIT ESP32 DevKitV1 from computer to stop serial monitor
======================================================================= 
eduroam-TH SP monitoring device version 0.30-2019103100
ESP32 Development Board: ESP32_DEV
...
Connecting WiFi to: eduroam
Security Type: WPA2 Enterprise
.............................
WiFi connection successfully
...
Wifi will disconnect and reconnect again in 30 minutes
Going into DeepSleep mode and will wake up in 30 minutes

* Disconnect DOIT ESP32 DEVKIT V1 from computer

=== How to use ===
==== Power on, Connect successful, Idle mode ====
<youtube>EGVzE2e_S2I</youtube>

==== Power on, Connect fail ====
<youtube>hLN1EWBDxj8</youtube>

==== Power on, Reset configuration ====
<youtube>YlLDC_T-q3o</youtube>

SP Monitor Heltec WIFI Kit 32

2019-11-07T09:05:41Z

Prakai:

{{DISPLAYTITLE:Prakai's Wiki, eduroam-TH SP Monitoring}}
{{#seo:
|keywords=Prakai Nadee, Wiki, Personal Wiki, eduroam, eduroam-TH, SP Monitoring, IoT, Heltec WIFI Kit 32
|description=Prakai Nadee's Wiki, eduroam-TH SP Monitoring
}}__NOTOC__

== eduroam-TH SP Monitoring firmware installation for Heltec WIFI Kit 32 ==
=== [https://heltec.org/project/wifi-kit-32 Heltec WIFI Kit 32] ===

[https://eduroam-mon.uni.net.th/doc/images/0/02/Heltec_wifi_kit_32-300px.png https://eduroam-mon.uni.net.th/doc/images/0/02/Heltec_wifi_kit_32-300px.png]

* ESP32-based (240MHz Tensilica LX6 dual-core)
* USB Micro, CP2102 USB to UART bridge
* 4MB SPI flash memory + 520K RAM
* 1 Button, 0.96 inch 128*64 OLED display, 1 Reset
* 2.4G PCB Antenna
* 5V DC power supply
* Battery Type: 3.7V Lithium (SH1.25 x 2 sockets)
* Development Platform MicroPython, Arduino

=== Where to buy ===
* [https://www.arduino4.com/product/696/heltec-esp32-oled-nodemcu-%E0%B8%9E%E0%B8%A3%E0%B9%89%E0%B8%AD%E0%B8%A1%E0%B8%88%E0%B8%AD-oled-%E0%B8%82%E0%B8%99%E0%B8%B2%E0%B8%94-0-96-%E0%B8%99%E0%B8%B4%E0%B9%89%E0%B8%A7 ฿580, Heltec ESP32 OLED NodeMCU พร้อมจอ OLED ขนาด 0.96 นิ้ว]
* [https://www.lazada.co.th/products/heltec-esp32-oled-nodemcu-oled-096-i328076037-s627949000.html ฿609, Heltec ESP32 OLED NodeMCU พร้อมจอ OLED ขนาด 0.96 นิ้ว]

=== How to flash eduroam-TH SP monitor firmware for Heltec WIFI Kit 32 ===
==== System requirement ====
* Desktop/Labtop computer
* Microsoft Windows 8, 10
* Windows PowerShell
* USB port

==== Instruction ====
* Download [https://www.rmuti.ac.th/user/prakai/p/eduroam-TH-firmware.zip eduroam-TH firmware and flashing tool]
* Extract the downloaded file to a local disk (ex: D:\):

* List of files:
D:\eduroam-TH-firmware\
- esptool.exe
- Heltec.ps1
- ESP32-eduroam-mon.ino.heltec_wifi_kit_32.bin
- ESP32-eduroam-mon.ino.partitions.bin
- boot_app0.bin
- bootloader_dio_80m.bin

* Run Windows PowerShell: '''Win+r >> PowerShell.exe'''
Windows PowerShell
Copyright (C) Microsoft Corporation. All rights reserved. 
PS C:\Users\Hello World> _

* Change location to D:\duroam-TH-firmware
PS C:\Users\Hello World> '''D:'''
PS D:\> '''cd eduroam-TH-firmware'''
PS D:\eduroam-TH-firmware> _

* Enable execution of PowerShell scripts
PS D:\eduroam-TH-firmware> '''Set-ExecutionPolicy -Scope CurrentUser -ExecutionPolicy Unrestricted -Force'''

* Run the flashing script: '''Heltec.ps1''' and follow the instruction
PS D:\eduroam-TH-firmware> '''.\Heltec.ps1'''
=====================================================================
=============== eduroam-TH monitoring device flash tool ===============
======================================================================= 
1) Connect Heltec WiFi Kit 32 to computer 
Press Enter to continue...:

* Connect Heltec WIFI Kit 32 to USB of computer
=======================================================================
=============== eduroam-TH monitoring device flash tool ===============
======================================================================= 
2) Select a COM port 
'''1: Silicon Labs CP210x USB to UART Bridge (COM111)'''
2: Standard Serial over Bluetooth link (COM5)
3: Standard Serial over Bluetooth link (COM6)
4: Standard Serial over Bluetooth link (COM3)
5: Standard Serial over Bluetooth link (COM4)
Q: Press 'Q' to quit. 
Please select COM port: '''1'''

* Firmware flashing starts, '''Long press PRG button if flashing does not start in 5 seconds'''
=======================================================================
=============== eduroam-TH monitoring device flash tool ===============
======================================================================= 
3) Long press PRG button if flashing does not start in 5 seconds 
Flashing: Silicon Labs CP210x USB to UART Bridge (COM111)
=======================================================================
esptool.py v2.6
Serial port COM111
Connecting....
Chip is ESP32D0WDQ6 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
MAC: cc:50:e3:99:1b:48
Uploading stub...
Running stub...
...
Leaving...
Hard resetting via RTS pin...

* Device reboot and running
=======================================================================
4) Disconnect Heltec WiFi Kit 32 from computer to stop serial monitor
======================================================================= 
eduroam-TH SP monitoring device version 0.30-2019103100
ESP32 Development Board: HELTEC_WIFI_KIT_32
...
Connecting WiFi to: eduroam
Security Type: WPA2 Enterprise
.............................
WiFi connection successfully
...
Wifi will disconnect and reconnect again in 30 minutes
Going into DeepSleep mode and will wake up in 30 minutes

* Disconnect Heltec WIFI Kit 32 from computer

=== How to use ===
==== Power on, Connect successful, DeepSleep and Wakeup ====
<youtube>bGOx1KzY4o4</youtube>

==== Power on, Reset configuration ====
<youtube>udKvff_LLDQ</youtube>

SP Monitor LOLIN32

2019-11-07T08:55:13Z

Prakai:

{{DISPLAYTITLE:Prakai's Wiki, eduroam-TH SP Monitoring}}
{{#seo:
|keywords=Prakai Nadee, Wiki, Personal Wiki, eduroam, eduroam-TH, SP Monitoring, IoT, WEMOS LOLIN32
|description=Prakai Nadee's Wiki, eduroam-TH SP Monitoring
}}__NOTOC__

== eduroam-TH SP Monitoring firmware installation for WEMOS LOLIN32 ==
=== [https://github.com/FablabTorino/AUG-Torino/wiki/Wemos-Lolin-board-(ESP32-with-128x64-SSD1306-I2C-OLED-display) Wemos Lolin board (ESP32 with 128x64 SSD1306 I2C OLED display)] ===

[https://eduroam-mon.uni.net.th/doc/images/7/7c/Lolin32-300px.png https://eduroam-mon.uni.net.th/doc/images/7/7c/Lolin32-300px.png]

* ESP32-based (ESP-WROOM-32 240MHz)
* USB Micro, CP2102 USB to UART bridge
* 4MB SPI flash memory + 520K RAM
* 1 Button, Classic 0.96” (168×64 pixels) monochrome OLED display, 1 Reset
* 2.4G Antenna max sensitivity reception: -97 dBm
* 5V DC power supply
* Development Platform MicroPython, Arduino

=== Where to buy ===
* [https://www.ioxhop.com/product/608/esp32-oled-128x64-on-one-board ฿380, ESP32 + OLED 128x64 on one board บอร์ดพัฒนา ESP32 พร้อมจอ OLED380, ESP32 + OLED 128x64 on one board บอร์ดพัฒนา ESP32 พร้อมจอ OLED]
* [https://www.mosfex.com/product/67/%E0%B8%9A%E0%B8%AD%E0%B8%A3%E0%B9%8C%E0%B8%94%E0%B8%9E%E0%B8%B1%E0%B8%92%E0%B8%99%E0%B8%B2-iot-%E0%B8%9E%E0%B8%A3%E0%B9%89%E0%B8%AD%E0%B8%A1%E0%B8%88%E0%B8%AD-oled-wemos%C2%AE-lolin32-esp32-oled-wifibluetooth ฿470, บอร์ดพัฒนา IoT พร้อมจอ OLED Wemos® Lolin32 ESP32 + OLED WiFi+Bluetooth]

=== How to flash eduroam-TH SP Monitoring firmware for WEMOS LOLIN32 ===
==== System requirement ====
* Desktop/Labtop computer
* Microsoft Windows 8, 10
* Windows PowerShell
* USB port

==== Instruction ====
* Download [https://www.rmuti.ac.th/user/prakai/p/eduroam-TH-firmware.zip eduroam-TH firmware and flashing tool]
* Extract the downloaded file to a local disk (ex: D:\):

* List of files:
D:\eduroam-TH-firmware\
- esptool.exe
- Lolin32.ps1
- ESP32-eduroam-mon.ino.lolin32.bin
- ESP32-eduroam-mon.ino.partitions.bin
- boot_app0.bin
- bootloader_dio_80m.bin

* Run Windows PowerShell: '''Win+r >> PowerShell.exe'''
Windows PowerShell
Copyright (C) Microsoft Corporation. All rights reserved. 
PS C:\Users\Hello World> _

* Change location to D:\duroam-TH-firmware
PS C:\Users\Hello World> '''D:'''
PS D:\> '''cd eduroam-TH-firmware'''
PS D:\eduroam-TH-firmware> _

* Enable execution of PowerShell scripts
PS D:\eduroam-TH-firmware> '''Set-ExecutionPolicy -Scope CurrentUser -ExecutionPolicy Unrestricted -Force'''

* Run the flashing script: '''Lolin32.ps1''' and follow the instruction
PS D:\eduroam-TH-firmware> '''.\Lolin32.ps1'''
=====================================================================
=============== eduroam-TH monitoring device flash tool ===============
======================================================================= 
1) Connect Wemos LOLIN32 to computer 
Press Enter to continue...:

* Connect Wemos LOLIN32 to USB of computer
=======================================================================
=============== eduroam-TH monitoring device flash tool ===============
======================================================================= 
2) Select a COM port 
'''1: Silicon Labs CP210x USB to UART Bridge (COM111)'''
2: Standard Serial over Bluetooth link (COM5)
3: Standard Serial over Bluetooth link (COM6)
4: Standard Serial over Bluetooth link (COM3)
5: Standard Serial over Bluetooth link (COM4)
Q: Press 'Q' to quit. 
Please select COM port: '''1'''

* Firmware flashing starts, '''Long press BOOT button if flashing does not start in 5 seconds'''
=======================================================================
=============== eduroam-TH monitoring device flash tool ===============
======================================================================= 
3) Long press BOOT button if flashing does not start in 5 seconds 
Flashing: Silicon Labs CP210x USB to UART Bridge (COM111)
=======================================================================
esptool.py v2.6
Serial port COM111
Connecting....
Chip is ESP32D0WDQ6 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
MAC: c4:4f:33:0c:11:bd
Uploading stub...
Running stub...
...
Leaving...
Hard resetting via RTS pin...

* Device reboot and running
=======================================================================
4) Disconnect Wemos LOLIN32 from computer to stop serial monitor
======================================================================= 
eduroam-TH SP monitoring device version 0.30-2019103100
ESP32 Development Board: LOLIN32
...
Connecting WiFi to: eduroam
Security Type: WPA2 Enterprise
.............................
WiFi connection successfully
...
Wifi will disconnect and reconnect again in 30 minutes
Going into DeepSleep mode and will wake up in 30 minutes

* Disconnect Wemos LOLIN32 from computer

=== How to use ===
--- Please wait ---

SP Monitor M5Stick C

2019-11-07T08:41:25Z

Prakai:

{{DISPLAYTITLE:Prakai's Wiki, eduroam-TH SP Monitoring}}
{{#seo:
|keywords=Prakai Nadee, Wiki, Personal Wiki, eduroam, eduroam-TH, SP Monitoring, IoT, M5StickC
|description=Prakai Nadee's Wiki, eduroam-TH SP Monitoring
}}__NOTOC__

== eduroam-TH SP Monitoring firmware installation for M5StickC ==
=== [https://m5stack.com/products/stick-c M5StickC ESP32-PICO Mini IoT Development Kit] ===

[https://eduroam-mon.uni.net.th/doc/images/9/94/M5StickC-01-300px.png https://eduroam-mon.uni.net.th/doc/images/9/94/M5StickC-01-300px.png]

* ESP32-based (ESP32-PICO)
* USB Type-C
* 4 MByte Flash + 520K RAM
* 2 Buttons, LCD(0.96 inch), 1 Reset
* 2.4G Antenna: Proant 440
* 5V DC power supply
* 80 mAh Lipo Battery
* Development Platform UIFlow, MicroPython, Arduino

=== Where to buy ===
* [https://www.lazada.co.th/products/m5stickc-esp32-pico-mini-iot-development-board-finger-computer-with-a-color-lcd-display-i367140126-s717288358.html ฿396, M5Stickc Esp32 Pico Mini Iot Development Board Finger Computer With A Color Lcd Display]
* [https://shopee.co.th/-%E0%B8%AA%E0%B9%88%E0%B8%87%E0%B8%9F%E0%B8%A3%E0%B8%B5-M5Stack-M5StickC-ESP32-PICO-Color-LCD-%E0%B8%A1%E0%B8%B4%E0%B8%99%E0%B8%B4-IoT-%E0%B8%84%E0%B8%93%E0%B8%B0%E0%B8%81%E0%B8%A3%E0%B8%A3%E0%B8%A1%E0%B8%81%E0%B8%B2%E0%B8%A3%E0%B8%9E%E0%B8%B1%E0%B8%92%E0%B8%99%E0%B8%B2%E0%B8%81%E0%B8%B2%E0%B8%A3%E0%B8%84%E0%B8%AD%E0%B8%A1%E0%B8%9E%E0%B8%B4%E0%B8%A7%E0%B9%80%E0%B8%95%E0%B8%AD%E0%B8%A3%E0%B9%8C-%E0%B8%9A%E0%B8%AD%E0%B8%A3%E0%B9%8C%E0%B8%94%E0%B9%82%E0%B8%A1%E0%B8%94%E0%B8%B9%E0%B8%A5-%E0%B8%AA%E0%B8%B3%E0%B8%AB%E0%B8%A3%E0%B8%B1%E0%B8%9A-Arduino-%E0%B8%9A%E0%B8%AD%E0%B8%A3%E0%B9%8C%E0%B8%94-i.64903522.2636407030 ฿399, M5Stack M5StickC ESP32 PICO Color LCD มินิ IoT บอร์ดโมดูล สำหรับ Arduino]

=== How to flash eduroam-TH SP Monitoring firmware for M5Stick_C ===
==== System requirement ====
* Desktop/Labtop computer
* Microsoft Windows 8, 10
* Windows PowerShell
* USB port

==== Instruction ====
* Download [https://www.rmuti.ac.th/user/prakai/p/eduroam-TH-firmware.zip eduroam-TH firmware and flashing tool]
* Extract the downloaded file to a local disk (ex: D:\):

* List of files:
D:\eduroam-TH-firmware\
- esptool.exe
- M5StickC.ps1
- ESP32-eduroam-mon.ino.m5stick_c.bin
- ESP32-eduroam-mon.ino.partitions.bin
- boot_app0.bin
- bootloader_dio_80m.bin

* Run Windows PowerShell: '''Win+r >> PowerShell.exe'''
Windows PowerShell
Copyright (C) Microsoft Corporation. All rights reserved. 
PS C:\Users\Hello World> _

* Change location to D:\duroam-TH-firmware
PS C:\Users\Hello World> '''D:'''
PS D:\> '''cd eduroam-TH-firmware'''
PS D:\eduroam-TH-firmware> _

* Enable execution of PowerShell scripts
PS D:\eduroam-TH-firmware> '''Set-ExecutionPolicy -Scope CurrentUser -ExecutionPolicy Unrestricted -Force'''

* Run the flashing script: '''M5StickC.ps1''' and follow the instruction
PS D:\eduroam-TH-firmware> '''.\M5StickC.ps1'''
=======================================================================
=============== eduroam-TH monitoring device flash tool ===============
======================================================================= 
1) Connect M5StickC to computer 
Press Enter to continue...:

* Connect M5StickC to USB of computer
=======================================================================
=============== eduroam-TH monitoring device flash tool ===============
======================================================================= 
2) Select a COM port 
'''1: USB Serial Port (COM101)'''
2: Standard Serial over Bluetooth link (COM5)
3: Standard Serial over Bluetooth link (COM6)
4: Standard Serial over Bluetooth link (COM3)
5: Standard Serial over Bluetooth link (COM4)
Q: Press 'Q' to quit. 
Please select COM port: '''1'''

* Firmware flashing starts
=======================================================================
=============== eduroam-TH monitoring device flash tool ===============
======================================================================= 
Flashing: USB Serial Port (COM101)
=======================================================================
esptool.py v2.6
Serial port COM101
Connecting....
Chip is ESP32-PICO-D4 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, Embedded Flash, VRef calibration in efuse, Coding Scheme None
MAC: d8:a0:1d:52:24:14
Uploading stub...
Running stub...
...
Leaving...
Hard resetting via RTS pin...

* Device reboot and running
=======================================================================
3) Disconnect M5StickC from computer to stop serial monitor
=======================================================================
M5StickC initializing...OK 
eduroam-TH SP monitoring device version 0.30-2019103100
ESP32 Development Board: M5Stick_C
...
Connecting WiFi to: eduroam
Security Type: WPA2 Enterprise
.............................
WiFi connection successfully
...
Wifi will disconnect and reconnect again in 30 minutes
Going into DeepSleep mode and will wake up in 30 minutes

* Disconnect M5Stick_C from computer

=== How to use ===
==== Power on, Connect successful, DeepSleep and Wakeup ====
<youtube>BPHoVxJ8wcA</youtube>

==== Power on, Connect fail ====
<youtube>vRlIAZ9Rwzg</youtube>

==== Power on, Reset configuration ====
<youtube>ezcVvCfqyEo</youtube>